Saudi Arabia’s SASO issued a new notice on July 13, 2026: MOCI (Ministry of Industry and Mines) has added control requirements for building materials products.

The Saudi Standards, Metrology and Quality Organization (SASO) issued a notice on July 13, 2026, updating once again the scope of controls under the Ministry of Commerce and Industry (MOCI). This update further expands the list of regulated products, following the previous batch added on June 18, 2026. Core Requirements of the New Regulation For all products included in the latest controlled list, when applying for a Shipment Certificate (SC) through the SABER platform, the following must be strictly observed: Prior approval from the Ministry of Industry and Mineral Resources (MIM): Approval must be obtained in advance from the Saudi Ministry of Industry and Mineral Resources (MIM). Submission of the MOCI declaration document: An "Importer Declaration" document approved by the MOCI (i.e., the MOCI approval letter) must be submitted. Important Note: Without this approved MOCI declaration document, any authorized certification body will refuse to issue both the Product Certificate (PC) and the Shipment Certificate (SC). The MOCI approval letter is valid for 60 days and will expire after that period. The products and customs codes (HS) covered in this notice are shown in the table below: NO.HS CodeProduct Description172011000Pig iron (cast iron), non-alloy, with a phosphorus content not exceeding 0.5% by weight.272012000Pig iron (cast iron), non-alloy, containing more than 0.5% phosphorus by weight.372051000Granules, made of pig iron, mirror iron, iron, or steel.472061000Iron or steel ingots (cast ingots)572081000Hot-rolled flat rolled stock, in coil form, processed only by hot rolling, with raised textured surface patterns.672084000Hot-rolled...

g-mark certificate for low voltage equipment

G-Mark (Gulf Conformity Mark) is a mandatory certification for low-voltage electrical equipment (LVE) entering the member states of the Gulf Cooperation Council (GCC).The certification aims to demonstrate compliance with the technical regulations established by the Gulf Standardization Organization (GSO), ensuring product safety and quality. 1. Applicable Countries and Product Scope Applicable countries: The certification is mandatory in all seven GCC member states, namely the United Arab Emirates, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, as well as the Republic of Yemen, which also recognizes this regulation. Voltage range: The regulation mainly covers electrical equipment with an AC voltage between 50V and 1000V, or a DC voltage between 75V and 1500V. Specific products: Under the GSO technical regulation, this applies to 13 categories of household electrical appliances and equipment. Common products include: Electric fans, refrigerators, washing machines Microwave ovens, air conditioners, electric heating appliances Electric irons, toasters, kitchen mixers Electric hairdressing appliances, water heaters Plugs, sockets, adapters, battery chargers, etc. 2. Certification Process The G-Mark certification generally involves the following key steps: Product testing: The manufacturer must have the product tested by a GSO‑designated Notified Body. The tests are carried out against the latest IEC (International Electrotechnical Commission) standards adopted by the GSO. Test reports are typically valid for 3 years. Submission and review: The manufacturer submits the complete application package along with the test report to the Notified Body. Certificate issuance: Upon successful review, the Notified Body issues the G‑Mark certificate, i.e., the Gulf Type Examination Certificate. The certificate is...

g-mark certificate for children’s toys in saudi arabia

For exporting toys to Saudi Arabia, the G-mark (Gulf Conformity Mark) certification is a mandatory market access requirement. What is the G-mark? The G-mark is a mandatory product conformity mark established by the Gulf Standardization Organization (GSO) for specific product categories. It indicates that the product complies with the essential health, safety, and environmental requirements of the Gulf Technical Regulations (GTRs). This certification is valid in all seven GCC member states, which include Saudi Arabia, the United Arab Emirates, Kuwait, Qatar, Oman, Bahrain, and Yemen. Which toys require G-mark certification? All products designed or intended for use by children under 14 years of age fall under the scope. This includes, but is not limited to: Plastic toys, plush/stuffed toys Electric/electronic toys Construction/assembly toys Regardless of whether the product is battery-operated or mains-powered, it must comply with the technical regulation. Certification Process and Core Requirements Appoint a Notified Body: You must engage a GSO‑authorized Notified Body (conformity assessment body) to carry out the assessment and issue the certificate. Product Testing: The product must be tested according to the relevant standards. Commonly used standards for toys include the EN 71 series, ISO 8124 series, and for electric toys, EN 62115 / IEC 62115 also apply. Prepare Technical Documentation: A comprehensive technical file must be compiled, typically including: Product specifications, design drawings Test reports from an ISO/IEC 17025‑accredited laboratory Risk assessment report Draft product labelling Declaration of Conformity (DoC) Obtain the Certificate and Register: Upon successful review, the Notified Body issues the G‑mark certificate and...

Saber certification for electric fan products

According to the regulations of the Saudi Standards, Metrology and Quality Organization (SASO), electric fans are mandatory certified products and must obtain certification through the SABER system to clear customs smoothly. Core Certification Pathway: GCC Certification + SABER Platform The certification path for electric fans is: first obtain GCC certification (G-Mark certificate), then use it as the basis to apply for PC and SC certificates in the SABER system. Simply put, GCC certification proves that the product complies with Gulf regional standards, while SABER certification is the electronic customs clearance permit required for imports into Saudi Arabia. Two Key Certificates The entire SABER certification process primarily involves the following two certificates, both of which are indispensable: Certificate TypeFull NamePurposeValidityPC CertificateProduct Certificate of ConformityCertifies that a specific model meets Saudi requirements; serves as the basis for the SC certificate.Typically 1 yearSC CertificateShipment Certificate of ConformityA unique customs clearance document for each shipment.Valid per shipment (one certificate per consignment) Detailed Application Process Prepare basic documentation: Product specification, circuit diagram, HS Code, samples, etc. Obtain CB test report: Conduct safety and EMC tests according to IEC standards in a CNAS-accredited laboratory to obtain a CB report. Apply for GCC certification: Submit the CB report and other documents to a GSO (Gulf Cooperation Council Standardization Organization) authorized body to obtain the G-Mark certificate. This certificate is usually valid for 3 years. Apply for PC certificate: The local Saudi importer must register an account on the SABER system, upload documents including the GCC...

Air Conditioning Product SABER Certification – A Complete Guide

For air conditioning products exported to Saudi Arabia, SABER certification is mandatory. SABER is an online mandatory customs clearance system operated by the Saudi Standards, Metrology and Quality Organization (SASO). Core Certification: Two Key Certificates The SABER system requires two types of certificates for each product: Certificate TypeFull NamePurposeKey FeaturesPC CertificateProduct Certificate of Conformity"Entry permit" for the Saudi marketIssued per product model, valid for one year (renewable), can be used for multiple shipmentsSC CertificateShipment Certificate of Conformity"Customs clearance permit" for each batchRequired for each individual shipment; must be obtained before the goods arrive at the Saudi port Important Note: All applications on the SABER platform must be submitted by a Saudi local company (the importer). Exporters cannot apply directly. Mandatory Requirements for Air Conditioning Products As air conditioners are high‑energy‑consumption appliances, additional prerequisites beyond the SABER platform are usually required: Energy Efficiency Registration & Labeling – Testing must be performed at a SASO‑approved laboratory, followed by registration and obtaining the energy efficiency label. G‑Mark Certification – Household air conditioners must obtain the GCC (Gulf Cooperation Council) conformity mark, i.e., the G‑Mark. RoHS Testing – Products must comply with Saudi Arabia's restrictions on hazardous substances. Key Standards and Important Updates (2026) Energy efficiency is a critical focus for AC certification, and significant updates came into force in 2026. All exporters must pay close attention. Energy Efficiency Standards by Capacity: Small ACs (rated cooling capacity ≤ 65,000 Btu/h): apply standard SASO 2663. Large / Commercial ACs: apply standard SASO 2874. 2026 Standard Update and Enforcement Timeline: Key...

What is the difference between SASO and saber?

SASO and SABER are two distinct but closely linked concepts within Saudi Arabia's product conformity certification system. In short, SASO is the "rule‑maker," while SABER is the "rule‑enforcer." SASO: The Standard‑Setter SASO stands for the Saudi Standards, Metrology and Quality Organization. Role: It is the official national standards body of Saudi Arabia, responsible for setting technical regulations, national standards, and quality requirements for all products entering the Saudi market. Functions: Its main functions include developing standards, accrediting and managing third‑party certification bodies, and supervising product quality in the market. Nature: You can think of it as Saudi Arabia's "national bureau of standards." SABER: The Certification Execution Platform SABER is a mandatory online certification network system launched by SASO. Role: It is the electronic platform developed by SASO to implement the "Saudi Product Safety Program" (SALEEM). Functions: All processes for product registration, certification applications, and certificate issuance for exports to Saudi Arabia must be completed on the SABER platform. Nature: You can view it as an "online service hall" for handling Saudi product certifications. Key Differences at a Glance AspectSASOSABERNatureOfficial body – a government organisationOnline system – a technical platformRoleSets the rules (standards, regulations)Executes the rules (registration, certification, issuance)ResponsibilitiesLegislation, supervision, accreditation of bodiesProduct registration, certificate applications and issuance, customs data integrationRelationshipOwner and manager of SABERTool and platform launched by SASO Key Points and Important Reminders Evolution of "SASO Certification": The traditional "SASO certification" is gradually being replaced by the new certification procedures carried out through the SABER platform. SABER can be seen as the digital upgrade of the SASO certification system. Core Certificates (PC...